W.A.C. Lighting # Illuminate paintings and drawings and bring your interiors to life with this lovely source of lighting. This low voltage loop back track head has a large number of accessories that offer a ton of design flexibility. To add to convenience, this head has a loop back design for easy aiming. Also, compatible with various track systems, this head will make decorating an interesting task. So, go ahead and give your visitors something to remember about your indoors. Features: -Loop Back Track Head -Available in various finishes: Black, Brushed Nickel/Black, Brushed Nickel/White, White -Compatible with Halo, Juno, Lightolier Series track systems -Die cast aluminum construction with screw on lens cap -Loop back design -Includes clear lens -Optional color lenses (regular or dichroic) available in various colors: Golden Amber, Blue, Green, Red or Yellow -Optional patterned and protective lenses available -Optional UVF lens for reducing ultraviolet light to protect artwork and fabric from fading -Optional low voltage extensions -Integral electronic transformer -Accomodates an MR16 halogen bulb, 50 or 75 watt maximum -Overall dimensions: 4.25" H x 2.25" W x 5.25" D Specifications.

IC-rated 6-inch-aperture recessed downlighting fixture
For commercial/residential use where housing will be in direct contact with insulation
UL/cUL listed for damp location, feed through, and direct contact with insulation
Aluminum housing dissipates heat; galvanized steel plaster frame
1-year warranty; requires 1 120-volt incandescent lamp (not included)
This is the housing to use if you want a larger-aperture (six inches) lighting solution for installation in insulated ceilings. (Compare to Halo's H7ICTNB, which gives you the added convenience of no-socket-plate construction.) The H7ICT also offers a wide variety of trims to choose from so you can customize the unit to match your décor, finish, and desired lighting effects (and, if you wish, make the unit air-tight). Like most of Halo's recessed lighting fixtures, the H7ICT is designed for ease of installation and flexibility across a variety of materials and situations. The hanger bars include pre-installed nails (self-tapping screws are also available) in special housings that ensure smooth, straight penetration, whether you're working with laminated composites, engineered I-joists, open-web joist plates, or even frozen lumber. The automatic leveling flanges allow you to hold the housing securely in place with one hand while driving nails with the other. The housing also includes integral T-bar clips for use with suspended ceiling T-grid systems.